ICOtec GEN2 GC500 Review: The Best Budget Call 2022

In the search for a new caller, you’ve likely come across ICOtec and their digital game calls. You might also have noticed that their prices seem to be a lot lower than other brands of callers. You might be seriously thinking about giving them a try.

Well, the new redesigned GC500 is the top model in the new ICOtec GEN2 GC range, and it has a lot of great features for people who want to spend less.

The ICOtec GC500 review:

The outside of the caller is very similar to other GEN2 models that ICOtec has made. The main difference is how it works.

Because it’s so light and small, you won’t have to worry about putting too much weight in your bag when you take it out of the box at first.

As a result, the handle has been changed to make it easier to hold without slipping. It also lets you hang it from a branch if you want to get it off the ground.

If you hang your caller up in the brush a lot, you might find that the weight makes the caller fall back and face up. You’ll want to make sure your caller is safe.

If you want to use a tripod instead, there is a threaded mount that lets you keep your caller in place.

GC500 Volume & Sound

A big thing to think about when you buy a caller is how it sounds and what volume it is. To make up for its small size, it has a 15 watt speaker. The sound quality is still very good, even though it isn’t as big as other callers.

It may be a little louder on windy days if you want it to be negative. In bad weather, you might not be able to hear well enough with this small device that runs on AA batteries.

If you find that you need more volume or want to cover more ground, the GC500 has an audio jack that you can use to connect an external speaker.

ICOtec GEN2 GC500 Electronic Game Call – Remote

As a bonus, the ICOtec GC500 only needs 4 AA batteries and the remote needs a 9 volt battery. For people who have used other callers, this is great news! For people to know, other electronic callers on the market can take up to 10AA batteries, so this is a lot less than that.

It still has great sound even if it only has four AAA batteries. The battery life is still good because the GC500’s power consumption is very low. And even when it’s 0 degrees outside, the battery life is still pretty good.

If you buy the GC500 caller, keep in mind that it doesn’t come with batteries. If you don’t have any, you’ll have to buy some.

There are many things you can do to get the most out of your caller, and one thing you might want to think about is getting extra rechargeable batteries. This way, you can switch them out when you need to.

GC500 Remote Features

Using the remote for the GC500 isn’t too difficult. Once you know how to use it, it’s easy to figure out if you need to use it at night, too. The remote is also easy to use because it has a simple design that makes it easy to grip.

You can now turn the calls on or off with the new remote for the GEN2 GC500 model. This means that you can make the calls more interesting and change them when you’re trying to get your prey in.

If you bought the old ICOtec models before, you might have had problems with buttons being pushed and turning on while you were carrying the caller in your backpack.

ICOtec GEN2 GC500 Electronic Game Call – Remote Night Mode

I hope this news is good news for you. If you’re thinking about upgrading your remote, you’ll be happy to know there’s now an on/off switch on the GC500 remote. When you move around with it, you won’t bump into it by accident.

The digital screen is very easy to read in the daytime because it is lit up. There is also a feature that makes the screen on the remote control glow so that it can be seen at night.

It also shows things like the volume level, the battery level of the remote, and a stand timer, so you can see what is going on at any given time.

8 calls that you know will work no matter what can be set up in two different “favorite” screens. This way, you can quickly find them.

GC500 Decoy

If you want to make your hunts a little more interesting for your prey, the GC500 can also be used with ICOtec electronic decoys. If you get one, you can use the GC500 remote to turn it on and off during a stage.

Attachable electronic prey decoy from ICOtec.

Remote Range

Because the remote can be used from 300 yards away and doesn’t need to be seen, this caller is a big hit.

Even though you’re not likely to shoot from that far, knowing that you can get up to this range means that it will be able to give you a lot of distance from your caller no matter what.

In case you need to go outside the range of the remote, both the unit and the remote control come with a radio antenna.

For most of the time, though, I’ve found that there isn’t even a need to even pull the antenna up on the remote because it’s usually worked great.

Remote Storage

As an added bonus, the remote can be attached to the caller so that you don’t accidentally lose it while you’re using it. This will make it easier for you to move around.

Then, when you put the remote away, make sure to put it back on the caller’s flat side first. If you do this, you might break the belt clip, which would be annoying.

Programming Calls On The GC500

The GEN2 GC500 is better than the GC300 and GC320 models because it can be used to make e-calls.

A standard size SD media card comes with 200 preloaded calls already in place. This means you can start using the GC500 as soon as possible.

The limit of 200 calls is because of the way the remote works. There is no limit on the size of the file or the length of the time you can record. If you have a lot of long call sequences, you can load them up as single calls and store them on an SD card up to 8GB in size.

Another great thing is that you can set up multiple SD cards with different calls on them, then switch them around. A lot of different hunting situations and making sure that you have the right sounds for the job at hand are possible thanks to this tool!

SD card: You can put your own calls on the SD card, as long as they are in.mp3 or.wav format. The remote will pick them up and play them on the GC500 when you use it.

You’ll also find that there are a lot of free calls on the ICOtec site. This will let you come up with a lot of call sequences that are just right for what you want to hunt.

Make new sounds is easy, says ICOtec. Tech-savvy people might have a hard time adding extra calls or taking new ones out of the SD card.

You have to download them, then change their names, and make sure there are three numbers in front of them before you do that. There are people who don’t like this and want it to be easier for the caller. This is a common way to do things.

This isn’t true at all. Once you figure out how it works the first time, it will be a lot easier to program in the future.

The MFK Sound Library

The ICOtec callers used to have a variety of MFK calls with them, but this is no longer the case. If you’ve looked into this, you might have seen that this is no longer the case, too.

When you buy the new GEN2 phones, you get to choose from a wide range of calls. Most of the calls come from ICOtec and a few from other companies.

Verdict On The ICOtec GEN2 GC500

There isn’t much else out there that costs as little as the GC500. Even though other electronic callers might be able to store more calls on one SD card, you aren’t going to need that many at a time.

People who hunt will not have any problems because they can just change out an SD card.

For people who are new to coyote hunting, this is a good choice because it has a small, durable design and a loud speaker that doesn’t use a lot of power.

It’s a good choice for people who have a lot of experience and want to try a new programmable caller but don’t want to spend a lot of money.

Leave a Comment